Medical consumables

Опис на набавката

1. Pericardial patch made of bovine pericardium, treated with glutaraldehyde, which increases durability and prevents shrinkage and aneurysm formation. The elastic part adapts to the applied surface. With anticalcification treatment, which captures the remaining aldehydes, thus reducing cytotoxicity and antigenicity. Dimensions, 10x14cm with a tolerance of +/-10% and a thickness of 0.2-0.5cm. PIECE 15
2. The hemoperfusion cartridge is intended for the effective removal of uremic toxins, inflammatory mediators, cytokines, chemokines, as well as medium and large molecules, including protein-bound toxins, in order to reduce or prevent complications in patients with severe infections, septic shock, multiorgan dysfunction, drug or pesticide poisoning, as well as in patients on maintenance hemodialysis and continuous renal replacement therapies. The cartridge shall be made of polystyrene-divinylbenzene macroporous adsorption material with a volume of 350 mL, designed for use in intensive care units and hemodialysis. The technology is based on a single cross-linked resin with a high pore structure, which allows for efficient removal of unwanted molecules through Van der Waals forces and hydrogen bonds. The adsorption surface is greater than 86,000 m² and is coated with a hydrophilic PVP graft layer, which ensures high biocompatibility and minimal hemolysis (<0.5%). The cartridge enables selective removal of small water-soluble molecules (urea, creatinine, uric acid and other uremic metabolites), protein-bound toxins (CMPF, p-cresol, indoxyl sulfate, homocysteine, methylglyoxal, etc.), as well as medium and large molecules (β₂-microglobulin, IL-1β, IL-6, TNF-α, leptin, cystatin C, parathormone and other inflammatory mediators). The operating parameters include an effective adsorption surface area of ​​more than 86,000 m², a blood chamber volume of 150–200 mL, an adsorbent volume of 350 mL and a hemolysis rate of less than 0.5%. The set shall consist of a hemoperfusion cartridge with a holder, a tubing set and priming and an adapter. The cartridge shall enable safe and biocompatible hemoperfusion in critical conditions, with controlled blood volume and a high degree of safety in clinical use. SET 10
3. Polytetrafluoroethylene (ptfe felt) sterile with dimensions 2.5cm x 15.2cm PIECE 200
4. Silicone tubes for retraction of organs and blood vessels, uncoated silicone, tube length 2 x 2.5mmx 45cm, red, blue, yellow PIECE 240
5. Bone wax with chemical composition 70% beeswax + 30% vaseline, 2.5 g bar. PIECE 120
6. Titanium clips for ligation of blood vessels-S(small)-3.6mm, cartridge to be adhesive and to contain 9 clips. The clip to have a pyramidal shape and a triangular shaped titanium wire for precise positioning. PIECE 15000
7. Titanium clips for ligation of blood vessels-S(small)-4.7mm, cartridge to be adhesive and to contain 9 clips. The clip should have a pyramidal shape and a triangular shaped titanium wire for precise positioning. PIECE 700
8. Titanium clips for ligation of blood vessels-M(medium)-5.6mm, the cartridge should be adhesive and contain 9 clips. The clip should have a pyramidal shape and a triangular shaped titanium wire for precise positioning. PIECE 30000
9. Neutral electrode with an effective contact area of ​​85 cm² (permissible deviation +/-10%) and a ring with an area of ​​23 cm² (permissible deviation +/- 10%), compatible with a neutral plate connection cable for an electrosurgical generator VIO3 ERBE or equivalent, intended for use regardless of the type of surgical procedure, to be made of a flexible material that can adapt to any body shape, to be intended for use in adult patients. PIECE 450
10. Spray for lubricating instruments before sterilization, consisting of white paraffin oil in a concentration of min. 2% and an appropriate propellant, without silicone, and validated according to EN ISO 17665 for both dry sterilization up to 180ᴼС and for sterilization with water vapor. Single packaging in the form of an aerosol without CFC (freon), with a volume of min. 300ml PIECE 1

Опис на набавката

11. Sterile surgical angiography set consisting of: Operating table cover with dimensions 150 x 190 cm with a reinforced non-woven textile part with dimensions 75 x 190 cm and double-sided polyethylene foil with dimensions 37.5 x 190 cm - qty. 1; Cellulose towels 20 x 30 cm - qty. 6; Talc-free surgical gloves, anatomically shaped with an inner coating for easy donning, pre-washed to reduce skin irritation, thickness from 0.19 to 0.23 mm, AQL up to 0.65 and tearing strength according to EN 455/2 greater than 12N - size 6.5 to meet MDD/42 EWG standards in accordance with PPE regulation (EU 2016/425) - qty. 1; Talc-free surgical gloves, anatomically shaped with an inner coating for easy donning, pre-washed to reduce skin irritation, thickness from 0.19 to 0.23 mm, AQL up to 0.65 and tearing strength according to EN 455/2 greater than 12N level 7, to meet MDD/42 EWG standards according to PPE regulation (EU 2016/425) - qty.1; Talc-free surgical gloves, anatomically shaped with an inner coating for easy donning, pre-washed to reduce skin irritation, thickness from 0.19 to 0.23 mm, AQL up to 0.65 and tearing strength according to EN 455/2 greater than 12N level 7.5 to meet MDD/42 EWG standards according to PPE regulation (EU 2016/425) - qty.2; SMMS four-layer surgical gowns, reinforced size L and minimum length 130 cm. Reinforcement in the front part vertically minimum 100 cm, horizontal minimum 45 cm. Width in the lower part minimum 66 cm. Sleeve length minimum 60.5 cm, reinforcement in the sleeve minimum 42 cm and adhesive tape along the sleeve reinforcements for additional protection against liquids. Textile elastic cuff for secure attachment to the wrist with a length of minimum 8 cm, chest circumference minimum 150 cm. Sterile wrap for double sterility and two towels minimum 30 cm x 40 cm. Resistance to penetration of liquids by a water column in the area of ​​the hands minimum 220 cm, in the front part minimum 125 cm. according to test method AATSS 127 - qty. 1; SMMS four-layer surgical gowns, reinforced size XL and minimum length 150 cm. Reinforcement in the front part vertically minimum 100 cm, horizontal minimum 50 cm. Width in the lower part minimum 69 cm. Sleeve length minimum 64 cm, reinforcement in the sleeve minimum 43 cm and adhesive tape along the reinforcements of the sleeve for additional protection against liquids, textile elastic cuff for secure attachment to the wrist with a length of minimum 8 cm and a chest circumference of minimum 160 cm. Sterile wrap for double sterility and two towels minimum 30 cm x 40 cm. Resistance to penetration of liquids by a water column in the area of ​​the hands minimum 220 cm, in the front part minimum 125 cm. according to test method AATSS 127 - qty.2; Plastic round container of 250 ml - qty.2; 100% cotton swab, with a safety ring made of silicone with titanium dioxide grade 4 with a double perforated label for record keeping - qty. 6; Plastic cube-shaped container with dimensions 27x27x5cm - qty. 1; Infusion set with a resistance of at least 2 Bar, with a three-part chamber that has a filter of at least 15µ with a hose with a lumen of at least 3x4.1 mm and a hose length of at least 180 cm - qty. 2; Manifold weighing at least 25 grams, with 3 outlets right OFF 600 PSI with a pressure resistance of at least 41.3 bar containing a concentration of Bisphenol A* less than 0.1% - qty. 1; Plastic syringe 20 ml consisting of two parts (piston and plastic body) - qty. 1; Plastic syringe 10 ml consisting of two parts (piston and plastic body) - qty. 1; Angiographic syringe 10 ml - qty.1; Hypodermic needle 26G - 0.45 x 12mm - qty.1; Adhesive fixator for polypropylene equipment with dimensions 9x11 cm with two fixation strips of 30 cm each - qty.1; Cotton compresses with RTG tape, 6 layers with dimensions 40x40cm without laces previously washed with RTG contrast chip composed of PVC and 55% barium sulfate without diethylhexylphthalate or other high-risk ingredient - qty.3; Gauzes made of 100% cotton with dimensions 10x10cm, 12 layers, 17 stitches. Weight 23 gr. composition per 10cm - min.100 horizontal and 70 vertical stitches. Tear strength: horizontal 50N/50mm, vertical 30N/50mm, with max. 10 sec. water immersion power. To meet DIN EN14079 standard and have a double perforated label for record keeping - qty. 50; Transparent equipment cover round with diameter ∅90cm - qty. 1; Transparent equipment cover 80x100 cm - qty. 1; Adhesive two-layer covers 50x50cm. Minimum absorption of the cover of minimum 250 ml/m2, absorption rate Run Off min. 75%. Resistance to water column min 195cm H2O according to AATSS127, tearing strength dry and wet 102N longitudinal and transverse 55N - qty. 2; Angiographic drape 240x330 cm with at least 3 layers around the work area consisting of, integrated transparent foils on both sides 70 x 225 cm for access to commands, an absorbent T-shaped part 100 x 225 cm in the middle between the foils and 240 x 110 cm at the level of the openings with a reinforced part 75 x 135 cm. Two oval openings with dimensions 5x7 cm for radial access and two oval openings with dimensions 7x9 cm for femoral access. The span between the femoral and radial openings should be at least 40 cm. . The angiographic drape should meet an absorption of at least 470ml/m2 according to ISO9073-6, an absorption rate (run off) of at least 45% and a water column according to AATCC 127 of at least 175 cm as well as a tear resistance of at least 185N dry and wet longitudinally and at least 73N transversely. - qty.1; Permissible deviations +/-3% SET 55

Опис на набавката

12. Surgical adhesive sterile drape made of non-woven polypropylene/polyethylene fabric and hot melt adhesive, with dimensions 90x110cm and adhesive part, with drape absorption min. 200ml per m2 according to EN ISO 9073-6, resistance to liquid penetration by water column min. 129 cm according to EN 20811, with Run off absorption rate of maximum 75% according to EN ISO 9073-11 and tear strength when wet min. 104N in length and min. 53N in width and when dry min. 99N in length and min. 50N in width, according to EN 29073-3. Permissible deviations +/- 3%. The drape must be sterilized with EO. PIECE 50
13. Sterile surgical hybrid set consisting of: operating table cover made of non-woven polypropylene / polyethylene with dimensions 200 cm x 250 cm - qty. 1, surgical gloves without talc, anatomically shaped with an inner coating for easy donning, pre-washed to reduce skin irritation, thickness from 0.19 to 0.23 mm, AQL up to 0.65 and tearing strength according to EN 455/2 greater than 12N - size 7.5 to meet the MDD/42 EWG standards in accordance with the PPE regulation (EU 2016/425). Permissible deviation +/-3% - qty. 3, SMMS four-layer surgical gowns, reinforced size XL and minimum length 150 cm. Reinforcement in the front part vertically minimum 100 cm, horizontally minimum 50 cm. Width at the bottom minimum 69 cm. Sleeve length minimum 64 cm, sleeve reinforcement minimum 43 cm and adhesive tape along the sleeve reinforcements for additional protection against liquids, textile elastic cuff for secure attachment to the wrist with a length of minimum 8 cm and a chest circumference of minimum 160 cm. Sterile wrap for double sterility and two towels minimum 30 cm x 40 cm. Resistance to penetration of liquids by a water column in the arm area minimum 220 cm, in the front part minimum 125 cm. according to test method AATSS 127 -- qty. 3, Mayo table cover made of non-woven polypropylene / polyethylene textile with dimensions 80 cm x 145 cm with a reinforced absorbent part 65x85cm - qty. 1, gauze minimum 16 layers, 17 rivets with dimensions 10 cm x 20 cm with barium sulfate radiopaque tape - qty. 30, 100% cotton swabs, with a safety ring made of silicone with titanium dioxide, grade 4, with radiopaque tape and with a double perforated label for record keeping - qty. 6, 250 ml plastic container - qty. 1, infusion set with a resistance of at least 2 Bar, with a three-part chamber that has a filter of at least 15µ with a hose with a lumen of at least 3x4.1 mm and a hose length of at least 180 cm - qty 1, manifold weighing at least 25 grams, with 3 outlets right OFF 600 PSI with a pressure resistance of at least 41.3 bar containing a concentration of Bisphenol A* less than 0.1% - qty - 1, plastic syringe 20 ml consisting of two parts (piston and plastic body) - qty 2, plastic syringe 10 ml consisting of two parts (piston and plastic body) - qty 1, angiographic syringe 10 ml - qty 1, transparent equipment cover round with a diameter of ∅90 cm - qty 1, transparent equipment cover 80x 145 cm - qty 1, round plastic container with teeth for wire 2500 ml - qty 1, Plastic container in the shape of a cube with dimensions 27x27x5cm - qty.1, surgical self-adhesive drape made of non-woven polypropylene/polyethylene fabric with dimensions 75x90cm and reinforcement of 20x50 cm - qty.2; surgical self-adhesive drape made of non-woven polypropylene/polyethylene fabric reinforced with reinforcement dimensions 30x50 cm with dimensions 150x250cm and adhesive part with dimensions min 15+70+15 cm - qty.1; hybrid cover made of non-woven polypropylene / polypropylene reinforced, with dimensions: length 450cm, width in the upper part 330cm and width in the lower part 235cm with reinforcement 100x180cm, with two-chamber bags for diathermy on each side, with 3 openings of which in the upper thoracic part one rectangular with dimensions 60x40cm and integrated incision foil and below 2 femoral oval openings - number 1. The reinforcement in the covers should satisfy at least an absorption of 477ml m2 according to EN ISO 9073-6, resistance to penetration of liquids according to a water column of min. 174 cm according to EN 20811, with a Run off absorption rate of maximum 45% according to EN ISO 9073-11 and a wet tearing strength of min. 193N along the length and min. 85N in width and dry min. 188N in length and min. 73N in width, according to EN 29073-3. Permissible deviation from the specified dimensions +/- 3%. SET 50
14 Hydrophilic Transfemoral Access Set 10cm, 4F-9F RO Full Length with Hemostatic Valve and Side Tube - Introducer with Anti-Kind Layer, Dilator, Wire 45cm 0.038'' Metal Needle 18G 7cm or Equivalent PIECE 150
15 Hydrophilic Nitinol Guidewires with Tapered Tip Coated with RO Polyurethane with Tungsten for Visibility and Hydrophilic Layer Full Length 0.018” - 0.038”, 150cm - 260cm Available in Straight, J, Angled and Double Angled Bolia Tip Shape PIECE 90
16 Diagnostic Angiographic Catheter Double Braided SIM 2,3, Vertebral, J, MP, Pig Tail, Inner Diameter 0.047” for 5F. Diameters from 4F to 6F, Lengths from 100 to 125cm. PIECE 30
17 Hybrid Hydrophilic Guidewires with extra-stiff Nitinol body with PTFE coil for passage through complex lesions and atraumatic hydrophilic distal section of 25 cm, coated with RO polyurethane with tungsten for visibility, diameter 0.014", 0.018", 0.035", length 180cm, 260cm, 300cm Available with tip shape Straight, and Angled PIECE 3
18. Peripheral support catheter with double internal grid and 3 radiopaque markers spaced 4 and 6cm from the tip for precise lesion measurement and stent or balloon positioning. Diameter 2.6 F and 4 F, compatible with 0.018” and 0.035” wire, lengths 65, 90, 135, 150 cm. With straight or 30º curved tip. PIECE 10
19 Hydrophilic guiding introducers with stainless steel coil for greater support, gold radiopaque marker on the tip, and PTFE inner layer, 5F-8F, 45cm-90cm length range. Hydrophilic part 5 - 35cm. PIECE 20

Опис на набавката

20 PTA balloon Semi-compliant coated with Paclitaxel layer 3μg / mm2, with lipophilic organic ester in a ratio of 80/20, multilayer coated, with extended drug availability for long-term efficacy. Catheter lengths 80 and 140 cm, tip profile 0.036'', 2 tungsten radiopaque markers, compatible with 5-6F introducer and 0.035'' wire. Nominal pressure 6 - 7 atm , RBP 16 atm. Dimensions: diameter 5 - 7mm, length 20-150mm. PIECE 5
21 PTA balloon Semi-compliant coated with Paclitaxel layer 3μg / mm2, with lipophilic organic ester in a ratio of 80/20, multilayer coated, with extended drug release for long-term efficacy. Catheter lengths 100, 140 and 150cm, tip profile 0.019'', 2 tungsten radiopaque markers, compatible with 4F introducer and 0.018'' wire. Nominal pressure 7 atm, RBP 14-16 atm. Dimensions: diameter 2 - 8mm, length 20-200mm. PIECE 5
22 PTA balloon Semi-compliant coated with Paclitaxel layer 3μg / mm2, with lipophilic organic ester in a ratio of 80/20, multilayer coated, with extended drug release for long-term efficacy. Catheter lengths 100 and 150cm, tip profile 0.017'', 2 tungsten radiopaque markers, compatible with 4F introducer and 0.014'' wire. Nominal pressure 7 atm, RBP 16 atm. Dimensions: diameter 1.5 - 4mm, length 40-200mm. PIECE 5
23 OTW balloon catheter made of nylon / pebax material, semi-compliant, catheter length 80 and 140 cm, coated with silicone layer, 2 radiopaque markers, tip profile 0.036 '', conical atraumatic design for the most severe lesions, crossing profile 0.057'' - 0.083'', compatible with 5-6F introducer, 0.035'' wire, nom. pressure 6-7 atm, RBP 13 - 16 atm. Dimensions: diameter 3 - 12 mm, length 20 -200 mm. PIECE 5
24 OTW balloon catheter made of nylon / pebax material, semi-compliant, catheter length 100, 140 and 150 cm, hydrophilic coating, 2 radioactive markers, tip profile 0.019'' max, conical shape, crossing profile 0.029'' - 0.057'', compatible with 4F introducer and 0.018 '' wire, nom. pressure 7 atm, RBP 14-16 atm. Dimensions: diameter 2 - 8 mm, length 20 -200 mm. PIECE 5
25 OTW balloon catheter made of nylon / pebax material, , semi-compliant, catheter length 100 and 150 cm, hydrophilic layer, 1-2 radioactive markers, tip profile 0.017'', conical shape, crossing profile 0.021'' - 0.033'', compatible with 4F introducer, 0.014'' wire, nom. pressure 7 atm, RBP 16 atm. Dimensions: diameter 1.25 - 4 mm, length 10 -200 mm. PIECE 5
26 Peripheral hydrophilic wire, stainless steel core, 0.014``, with lengths from 185 to 300 cm, with a tip load of 3 to 6 grams PIECE 5
27 Peripheral hydrophilic wire, stainless steel core, 0.018``, with lengths from 110 to 300 cm, with a tip load of 6 to 8 grams PIECE 5
28 Balloon catheter for dilation up to RTB:24ATM. Compatible with 5F,6F and 7F introducers. minimum balloon diameter range 3 -12 mm, minimum length range 20-200 mm and minimum catheter length 40 - 135 cm PIECE 10
29 Peripheral balloon catheter with drug, active ingredient PACLITAXEL maximum 2 micrograms, minimum balloon diameter range 2.00mm to 8.00mm and minimum length range 30mm to 200mm and catheter length 80cm, 90cm, 135cm, 150cm.PIECE15
30 Angiographic diagnostic catheter, 5F, length options 40cm, 65cm and 100cm, compatible with 0.035'' and 0.038'' guidewire. Tip shape options: bern, h1, sim1, sim2, st, chgb, contra 2, c1, c2, mik, shk1.0, rc2, rdc. PIECE 40
31 Coronary Balloon Catheters – NS- (Non-Compliant) for pre-dilation of large coronary arteries with hard calcified lesions and occlusions and for post-dilatation in the LM stent. Compatible with 0.014 inch wire. Diameter range from 5.5 and 6mm, and lengths range from 8 to 20mm. Rx and OTW wire placement, low profile passage of 0.017 inch or 0.43mm. PIECE 10
32 Balloon Expanding Stent for Peripheral Arteries. Set of medical grade stainless steel 316 L, compatible with 0.035" and 6-7F leadwires. Diameter 5-10 mm, balloon length 20-60 mm Stent diameter is 5-10 mm, stent length 17-57 mm. PIECE 4
33 Renal and biliary premounted stent system, Renal Monorail Premounted Stent System for transluminal renal angioplasty, compatible with 0.018" and 5-6F. balloon length 16-20 mm Stent diameter is 4-7 mm, stent length 15-19 mm. PIECE 3
34 Self-expanding peripheral stent, profile 6 F, 0.035, combination of open and closed cell design for radial strength and flexibility, diameter 5 -14 mm, length 20-120 mm, catheter length 75 cm and 120 cm. PIECE 5
35 Inflation pump with manometer with working pressure 26 atm capacity up to 20ccm, with ergonomic handle, Y connector, one-touch pressure release mechanism, torque device, insertion tool and stopper PIECE 50
36 Drug-eluting Paclitaxel-coated DES for peripheral arteries, SFA region, catheter length 75 and 130 cm, diameter 6 and 7 mm, stent length 40-150 mm, with polymer, triaxial delivery system. Paclitaxel drug dose density maximum 0.300 μg/mm2 PIECE 3
37 Balloon catheter with monorail system, compatible with 0.014'' guidewire and 4F introducer. RBP: 12ATM and 14ATM. Low lesion entry profile (0.017''/0.43mm), minimum balloon diameter range of 1.5 -4 mm, minimum length range of 20-220 mm and minimum catheter length of 90 - 150 cm PIECE 4
38 Platinum Chromium Alloy Coronary Stent for large proximal vessels, thin profile, nonlinear link design of open cells, with bioresorbable polymer and cytostatic everolimus (DES), diameter range from 3.50 to 5.00 mm with the possibility of overexpansion to 6.00mm and length from 8 to 32mm compatible with 5F guiding catheter for all sizes. PIECE 4
39 Carotid Nitinol Stent for embolus protection, with dual micro mesh and closed cells, flexible, low profile 5F Rapid exchange. Self-tapering. With the possibility of withdrawal into the sheath and repositioning - resheatable. Diameter from 5 to 10mm, lengths from 16 to 43 mm PIECE 2

Опис на набавката

40 Hybrid guidewires for PCI, 0.014", 180 cm long, proximal part of stainless steel coated with PTFE, distal part of Nitinol and hydrophilic coated, straight shaping tip with platinum spiral for better visibility, with different degree of loading on the tip from 0.6 gf to 3.6 gf. PIECE 7
41 Pressure hose with rotating adapter (M/F), from transparent reinforced polyurethane for visual control, to withstand pressure minimum 84 Bar (1200 psi), length 25 - 100 cm PIECE 150
42 V08AB02-IOHEXOL-Injection solution-350mgJ/ml Polypropylene bottle ml. 20000
43 V08AB09-IODIXANOL-Injection solution-320mg l/ml Polypropylene bottle ml. 20000
44 Hydrophilic introducer with locking mechanism on the dilator for easy retention of the desired position, with an X-ray marker (strip) on the tip, the body is reinforced with a coil, minimum diameter range from 12 to 26F, and a working length of 28cm and 64cm PIECE 2
45 Specially designed lasso-shaped wire for removing foreign bodies from blood vessels, with a maximum diameter of 2.0 - 35mm; complete with appropriate torquer, catheter and introducer / introducer PIECE 2
46 Lunderquist guide wire (0.035"), Extra Stiff, for complex diagnostic and interventional procedures with large endovascular devices, for maximum support and precise visualization of the tip, made of Stainless steel with PTFE coating, with a flexible atraumatic tip 4-15cm, straight and J curved 3mm, with a total length of 90-300cm, taper length 8-15cm, floppy tip length 3-7cm. PIECE 15
47 Set for removal of foreign body from the cardiovascular system. The set shall consist of three loops, made of nitinol and platinum and a catheter with a radiopaque marker. The loop shall have a diameter of 6-45mm, with a total length of 120 and 175cm. The catheter shall be 3.2, 6 and 7F and a length of 100 and 150cm. The set shall have a torque device. SET 2
48 Guide wire for coronary interventions with a core of Nitinol elastinite, intended for routine interventions, with a diameter of 0.014 inches, a length of 190 to 300 cm, a flexible tip of 0.6 gr. weight with a spiral part of 3cm X-ray visible, with a style on the tip in the form of a shaping strip, a coil on the tip, cover type BARE COILS and a predefined straight or curved tip shape. The wire can be with hydrophilic or hydrophobic coating PIECE 15
49 Guide wire for peripheral interventions, for intraluminal passage in chronic total occlusions below the knee, made of alloy steel with a smooth transition into a taper tip and a sleeve of hydrophobic polymer, without polymer at the tip. Length from 190 to 300 cm, with a diameter of 0.014 inches which at the tip transitions into a taper of 0.012-0.009 inches. Penetrating tip of 4.8, 9.7 and 13 g weight PIECE 10
50 Guidewire for coronary interventions in chronic occlusions, made of alloy steel, with a diameter of 0.014 inches, a length of 190 to 300 cm, hydrophilic with a hybrid coating with a polymer sleeve of at least 20 cm, no polymer at the tip, penetration force of 40 to 200 kg/in², penetrating tip of 4.8 to 13.9 g weight, in a length of 3 cm X-ray visible, tip style - core to tip - from the core to the tip in one piece for better control, certain models with conical tapering at the tip PIECE 10
51 Guidewire for peripheral interventions, below the knee, with a hybrid design and two levels of support, steel core and nitinol tip, suitable for shaping, hydrophilic coating on the polymer that is at least 3 cm X-ray visible, tip with a weight of 2.8 to 3.5 g, diameter of 0.014 inches and a length of 190, 250 and 300cm PIECE 15
52 Guidewire for peripheral interventions, SFA and below the knee, with hybrid design, steel core and nitinol tip in lengths of 10 and 25 cm, suitable for shaping, hydrophilic coating of the polymer that is at least 3cm radiopaque, tip with a weight of 4 g, diameter 0.018 inches and length from 210 to 300cm PIECE 25
53 Guidewire for peripheral interventions in calcified occlusions, for straight and tortuous blood vessels, with varying degrees of penetration force and varying degrees of tip hardness, (0.018"), hydrophilic coated, length span of 145, 195, 300cm, tip radiopacity of 3 cm, tip load of 4, 12, 30 gr, penetration force 17, 52 and 250 kg/in² PIECE 10
54 Wire peripheral intervention guide, for extra support, diameter 0.035 inches, steel core, core to tip style, cover type-bare coils, hydrophobic coated, atraumatic tip suitable for shaping, 5 cm tip radiographic visibility, lengths of 145, 190 and 300 cm PIECE 10
55 Peripheral nitinol stent system, with a woven mesh design, self-expanding, flexible and kink-resistant, intended for interventions on the femoral and popliteal arteries, dimensions from 4.5 to 7.5 mm diameter and stent length from 20 to 200 mm, 6F compatible, catheter length 80 to 120 cm PIECE 10
56 Balloon catheters for peripheral arteries above and below the knee, compatible with 0.018” guide wire, balloon diameter from 2 to 6 mm, balloon length from 20 to 200mm, compatible with 4-5F guiding introducer, flexible radiopaque tungsten markers, catheter length 90 - 150CM, hydrophobic coating, RBP of 14atm for all sizes PIECE 10
57 Balloon catheters for peripheral arteries compatible with 0.035 inch guide wire, balloon diameter from 3.0 to 14mm, balloon length from 20 to 250mm, compatible with 5 - 7F guiding introducer, catheter length 80 to 135cm, hydrophobic coating PIECE10
58 Peripheral support catheter with hydrophilic coating on the distal 40cm, with steel mesh in the wall, with 4 platinum-iridium radiopaque markers at the tip and every 5cm. Support during interventions on arteries below the knee with 4F guiding introducer. Straight, curved and angled tip. The catheter is 2.3F and 2.6F in diameter, which can be used coaxially with a 4F catheter for greater support, length 65 - 150cm, compatible with wire 0.014'' - 0.035'' PIECE 10
59 Vascular closure system with collagen and absorbable suture, in a set with an introducer and a 70cm guide wire, size 6 to 8 French SET 10

Опис на набавката

60 "Dual-chamber thoracic drainage for extraction of air and fluids from the patient's chest
• To have a filling funnel
• To have 2 sets of tubes with Anti-Kink, one to be attached
• To consist of two drainage chambers, with the possibility of simultaneous use with a total capacity of 2400ml
• Graduations: 1 ml to 100 ml, at 5 ml from 100 ml to 280 ml, at 10 ml above 280 ml
• To have an automatic high-pressure release valve
• To have an anti-reflux valve/indicator for high negativity and prevention of water loss
• To have a manual valve for high negativity release
• To have manual suction regulation
• The components to be made without latex
• Sterile for single use" PIECE 500

Список и краток опис на правилата и критериумите

- In accordance with the Law on Medicines and Medical Devices, for registered medical devices, the economic operator must submit an approval for placing a medical device on the market or a temporary or permanent approval for parallel import.
- For unregistered medical devices, the economic operator must submit a document permitting import (approval for intervention import) in accordance with the Law on Medicines and Medical Devices, or a Certificate issued by MALMED, confirming that if they are selected in the procedure, they will be issued an import permit.