Laboratory devices and equipment

PHO Center for Public Health - Skopje

More details in the tender documentation.

Рок

Рокот за прием на понудите беше 2023-05-08. Набавката беше објавена на 2023-04-06.

Кој?

• PHO Center for Public Health - Skopje

Што?

Каде?

• Северна Македонија › Северна Македонија

Историја на набавките

Датум	Документ
2023-04-06	Оглас за договор
2023-05-03	Дополнителни информации

Оглас за договор (2023-04-06)
Предмет
Опсег на набавката
Наслов: Medical equipments
Референтен број: 0507-1211/2023
Краток опис: More details in the tender documentation.
Метаподатоци на огласот
Оригинален јазик: англиски 🗣️
Вид на документ: Оглас за договор
Природа на договорот: Стоки
Регулатива: Друго
Заеднички речник на набавки (CPV)
Шифра: Медицинска опрема 📦
Дополнителен CPV: Микробиолошки култури 📦
Вакцини против полио 📦
Место на извршување
NUTS регион: Северна Македонија 🏙️
Северна Македонија 🏙️

Постапка
Вид на постапка: Отворена постапка
Вид на понуда: Поднесување за сите делови
Критериуми за доделување
Најниска цена

Договорен орган
Идентитет
Земја: Северна Македонија 🇲🇰
Вид на органот кој доделува: Тело уредено со јавно право
Име на органот кој доделува: PHO Center for Public Health - Skopje
Поштенска адреса: Nr.18, Third Macedonian Brigade str.
Поштенски број: 1000
Поштенско место: Skopje
Контакт
Интернет-адреса: http://www.cph.mk 🌏
Е-пошта: info@cph.mk 📧
Телефон: +389 71248572 📞
Факс: +389 23298251 📠
URL за документи: https://e-nabavki.gov.mk/PublicAccess/Home.aspx#/home 🌏
URL за учество: https://e-nabavki.gov.mk/PublicAccess/Home.aspx#/home 🌏

Референца
Датуми
Датум на испраќање: 2023-04-06 📅
Рок за поднесување: 2023-05-08 📅
Датум на објавување: 2023-04-11 📅
Идентификатори
Број на огласот: 2023/S 071-216255
OJ-S издание: 71

Предмет
Опсег на набавката
Проценета вкупна вредност: 35 000 000 MKD 💰
Наслов на делот: Electric steam appliance:
Број на дел: 1
Краток опис:

Dry steam electric appliance with the following characteristics:

Safety cap

18/10 stainless steel boiler

Dry saturated steam superheated to 180°C

Continuous steam regulation from 0 to 115ml/min

Steam pressure: up to 58 psig

Audio warning when

water runs out

Light for "Steam ready" and "No water".

Manometer

Steam release button

with safety locking device (patent)

Used capacity: 2 liters

Power: 1500W

Времетраење: 12 месеци
Наслов на делот: Laboratory pH meter
Број на дел: 2
Краток опис:

- Operating range of pH measurement from 0-14 pH and resolutions of 0.001/0.01/0.1 pH units. Accuracy of pH measurement ≤0.02 pH;

- To have the possibility of automatic and manual calibration in 1, 2 or 3 points, with the possibility for the operator to manually set the value of the calibration buffer (ie, to be able to use buffers whose values are not set by the manufacturer);

Automatic recognition of buffers

- To have a backlit screen,

- To be able to memorize the results

- The instrument should be able to connect to a printer

- The instrument should be supplied with a combined glass pH electrode intended for measuring pH in liquids.

- The electrode should measure in a minimum range of 0-14 pH, with an accuracy of ±0.01 pH or better.

- The electrode should have a glass body and liquid electrolyte with the possibility of refilling

The instrument should be equipped with a temperature sensor with a minimum range of 0 to 100°C, a resolution of 0.1°C or better and an accuracy of ± 0.5% or better

- The device should be complete with a pH electrode - quantity 2, a stand and holder for the electrode and the temperature sensor, ATC probe, cable and instructions;

- To have a certificate for performed calibration according to standard ISO 17025 or equivalent;

Наслов на делот: Laboratory Conductometer
Број на дел: 3
Краток опис:

- Conductivity measurement working range of minimum 0.01 µS/cm - 200.0 mS/cm with a minimum resolution of 0.01 µS/cm - 0.1 mS/cm adjustable to the measurement range, and an accuracy of ±0.5% or better;

- To have the possibility of automatic and manual calibration,

with the possibility for the operator to manually set the value of the calibration standards (ie to be able to use standards whose values are not set by the manufacturer);

- Possibility to manually enter the value of the constant

- Automatic recognition of buffers

- To be able to memorize the results;

The instrument can be connected to a printer.

- The instrument should perform automatic temperature compensation with a temperature sensor that has a working range of min. from -10oC to + 105oC, resolution of 0.1oC and accuracy of min. 0.5%. The instrument should express the result at 20 oC or 25 oC (th e analyst can choose the temperature of expression of the result).

- The instrument should be equipped with a Pt electrode

for measuring conductivity, which has glass protection (glass body conductivity cell) and which has a minimum measurement range of 0.0 µS/cm to 200 mS/cm with an accuracy of ±0.5% or better

-The device should be completed with a conductive probe - quantity 2, a stand and a holder for the electrode; cable and instructions; suitable printer and paper for printing results;

- To have a certificateof calibration performed according to the ISO 17025 standard or equivalent-

Наслов на делот: Centrifuge for chemical laboratory analyses
Број на дел: 4
Краток опис:

The centrifuge chamber is made of stainless steel

The centrifuge must have an LCD screen with backlight or equivalent, which will constantly display the set parameters and the parameters in real time

The centrifuge should have a microprocessor control and a control panel for submitting the parameters

To feature a minimum of 50 different user reprogrammable programs, a minimum of 10 selectable acceleration and deceleration curves

Automatic rotor recognition

The centrifuge should have an option for automatic monitoring of the number of operating cycles of the rotor

It shall have an angle rotor with an aluminum cover, a minimum RCF of 10,621 xg or equivalent with a capacity of at least 12 positions for 50 mL test tubes and suitable adapters for each position of the rotor for 15 mL test tubes

The centrifuge motor must be brushless induction in order to be maintenance-free

The centrifuge should be with 1000 - 15000 revolutions per minute or better

To be able to adjust the time from 10 sec to 99h or better

The centrifuge automatically detects imbalance

To have automatic opening of the lid at the end of the cycle, with the possibility of turning it off

To have a low level of noise

To have an electromechanical opening of the lid

To give a visual indication when the centrifuge is at rest

To have an acoustic alarm, with the possibility of turning it off

To provide notification when rotor life is reduced

The centrifuge should have the possibility of qualification

To have a special opening button

The centrifuge is manufactured

according to the latest national and international standards including EN 61010-2-020 or equivalent

Наслов на делот: Gas chromatograph with mass detector (GC/MS)
Број на дел: 5
Краток опис:

1. Chromatograph

Oven temperature range: minimum 450 °C

CO2 cryogenic cooling option included

Operating temperature tolerance interval from a minimum of -40℃ to a minimum of +450℃

Possibility of temperature program: minimum 20 steps

Temperature setting: maximum step of 0.1°C

Isothermal temperature stability:

± 0.01°C or better

Oven heating speed: 120°C/min or better

Furnace cooling speed from 450°C to 50°C in 3-4 min

Operating time: maximum 9,999 min

Overheating

prevention system

Oven overheating prevention system

Integrated leak tests and high vacuum gauges

Filaments: Dual filament system

Possibility to delay the start in order to increase the term of the filaments

A window for observing the operation of the filaments

Vacuum system with turbomolecular pump

Ion source – ultra-inert metal with minimal adsorption (resistance to contamination)

Data communication

- LAN or equivalent

1.1 Injector

Injector type- Split/Splitless

Temperature range of the injector: from a minimum of 450 °C

Split ratio: 7500:1

Pressure tolerance interval: from a minimum of 0.005 to a minimum of 1000 kPa

1.2 Detection system: Mass detector with dynode and electronic multiplier

Working principle of EI electron ionization

Mass filter type: Single quadrupole with pre-filter

Electron energy: adjustable from a minimum interval of 0 eV to a minimum of 240 eV

20,000 amu scan speed or better

Mass range: from a minimum of 1 to a minimum of 1,200 amu

Mass stability: ±0.1 u/48 hours or better

Scan mode: Full, Segment, Select ion mode, Combined

Ion source

temperature: with an interval of minimum 100 to minimum 350 °C (increment 1 °C)

Operating temperature range for the portable

Operating temperature range for the transmission line: with an interval of 100 °C minimum to 400 °C minimum (1 °C increment)

Sensitivity (EI): 2,500:1 or better (1uL of 1pg/uL OFN as standard)

Recording modes: SCAN, SIM, simulative SCAN/SIM

1.3. Autosampler

- Designed for liquid injection from a minimum of 100 to a maximum of 130 vial sites

- Injection volume from a minimum of 0.5 to a minimum of 100 uL

1.4 Software application for full GC/MC control

-Calibration – internal and external standards method, peak group calibration and calibration method with reference peaks for identification

-Simulation display of multiple chromatograms

and their mathematical modification.

- Display of total results from all selected and simulated chromatograms.

- Possibility of offline evaluation of chromatograms,

development of new methods and reports

-Column testing for minimum peak calculation in terms of symmetry, efficiency and resolution

-Electronic signature – each chromatogram can be signed electronically based on the user's name or signature certificate

- Input of data generated by other programs (chromatograms or mathematical data) in at least the following formats – TXT or AIA

-Data output with or without chromatogram display

Compliance with standard - 21 CFR Part 11 or equivalent

1.5 Included NIST Mass Spectral

Library (or equivalent) containing at least:

- EI Spectra of the library: min. 350,000

- EI Chemical structures: min. 350,000

- EI Unique compounds: mi 300,000

- EI Retention index values: min. 170,000

1.6 Included personal computer and UPS with a configuration that will meet the minimum requirements of the instrument manufacturer

Наслов на делот: Crusher for crushing plastic children's toys to a particle size of 2 millimeters or better
Број на дел: 6
Краток опис:

Crusher for crushing plastic children's toys to a particle size of 2 millimeters or better

Наслов на делот: Incubator with cooling system
Број на дел: 7
Краток опис:

Operating temperature range from 0◦C minimum (at least 10◦C below ambient temperature) to +50◦C or better, adjustable in minimum increments of 0.1◦C or better

The incubator should contain a minimum of PID control with PT100 sensor and LED display

To have an adaptive multifunctional digital PID microprocessor controller with a high definition screen

Operating temperature range from a minimum of +10◦C above ambient to +50◦C or better, adjustable in minimum increments of 0.1◦C or better

To have at least 3 shelves

Type of conversion - Natural convection

Capacity of minimum 2×23 liters

Nominal power consumption of minimum 160 (W)

Weight of a maximum of 34 kg

Incubator interior dimensions: W x H x D: 380x470x790

mm or larger

To contain at least 2 chambers that can work independently at different temperatures and

can be switched off separately.

Each chamber should have at least its own transparent door, so that samples can be observed without opening the door, thus preve nting temperature changes in the chambers

The housing is constructed entirely of epoxy-coated mild steel.

Наслов на делот: Centrifuge
Број на дел: 8
Краток опис:

Laboratory centrifuge for centrifugation of samples with a maximum capacity of 12 x 15 ml

The centrifuge should have a maximum speed of 5000 rpm and a maximum RC F of 2.822x g with the ability to adjust the speed in a minimum range of 1000 – 5000 rpm in increments of a maximum of 10 RPM

The laboratory centrifuge should have a digital display to show the speed in RPM/RCF and time

The laboratory centrifuge should be controlled by a programmable microprocessor control system

The centrifuge must have a timer in the minimum range of 1 - 99 min with HOLD position

The centrifuge should have a fixed acceleration rate and a fixed braking rate

A rotor with a capacity of 12 x 15

ml must be included

The laboratory centrifuge must have the ability to lock the lid as well as display the process and an alarm for the end of the operation.

Наслов на делот: Water bath
Број на дел: 9
Краток опис:

Temperature range of at least 25°C to 100°C

Temperature stability of +/-0.1 K

1.5kW; 230V; 50-60Hz

Maximum dimensions:

410x300x335mm (WxDxH)

Filling capacity in the range 38l +- 2l

Maximum weight of 22 kg.

Integrated timer

Electronic functionality check with visual and audible alarm in case of error and protection against overheating and "dry operation" (low water level)

High-contrast TFT display no less than 3.5 inches

Complete with double wall lid and water level controller

Complete with at least three racks for different test tubes – with at least 20 holes for ø18, with at least 5 holes for ø31, with at least 20 holes for ø13

Наслов на делот: Cordless electrostatic hand sprayer with the following features
Број на дел: 10
Краток опис:

Professional Cordless Electrostatic Handheld Sprayer

Professional 16.8V 3350mAh Lithium Battery

Professional 16.8V

Battery Charger

Nozzle Wrench

3-in-1 Nozzle (40/80/110 Microns)

Flow:

40 micron: 92 ml per minute, 80 micron: 112 ml per min

minute, 110 micron: 311 ml per minute

Pouch and 1L hand tank with cap

Наслов на делот: Professional cordless electrostatic backpack sprayer
Број на дел: 11
Краток опис:

Professional 16.8V 3350mAh Li-ion battery

Professional 16.8 V charger

Nozzle wrench

3-in-1 nozzle (40/80/110 microns)

40 microns: 100.6 ml per minute

80 microns: 150.8 ml per minute

110 micron: 396.3 ml per minute

Tank 8.5 L

Extension rod 30 cm

Правни, економски, финансиски и технички информации
Услови за учество
Способност за вршење на стручната дејност: More details in the tender documentation
Техничка и професионална способност:

- the economic operator should train the medical personnel who will handle with the equipment

- the economic operator should be authorized by the manufacturer for the distribution of the equipment.

- the economic operator should be authorized by the manufacturer and/or the authorized manufacturer of the equipment to participate in the tender procedure

- must provide a minimum 1 (one) year warranty on the offered products;

- the bidders must submit a document with the technical specification of the offered product with their bid

- proof of training carried out by the manufacturer of at least one person trained for the installation and servicing of the equipment

Минимално ниво(а) на стандарди:

- the bidder, together with the offer, must submit a statement that if he is selected as the most favorable bidder, he will carry out training of the personnel in handling the device;

- an authorization document from the manufacturer of the equipment confirming that the economic operator is an authorized distributor for it;

- authorization document for the participation of the economic operator in the tender procedure, issued by the manufacturer and/or the authorized distributor of the equipment;

- a statement with which the economic operator will guarantee that if he is selected as the most favorable bidder, he will provide warranty period for the offered product of at least 1 (one) year;

- bidders must submit with their bid a Catalog with precisely and unambiguously marked pages and a marked product for the offered catalog number.

- certificate for the training carried out by the manufacturer of at least one person trained for the

installation and servicing of the equipment.

Постапка
Правна основа: 32014L0024
Време за прием на понуди: 11:00
Јазици на кои може да се поднесат понуди или барања за учество: македонски 🗣️
Период на важност на понудата: 2 месеци
Датум на отворање на понудите: 2023-05-08 📅
Време на отворање на понудите: 11:00
Место: PHO Center for public health Skopje

Договорен орган
Контакт
Контактна точка: Sector for public procurements
URL на документи: https://e-nabavki.gov.mk/PublicAccess/Home.aspx#/home 🌏

Дополнителни информации
Тело за преглед
Име: State commission for appeals on public procurements
Поштенска адреса: No. 63a, bul.„Ilinden“
Поштенско место: Skopje
Поштенски број: 1000
Земја: Северна Македонија 🇲🇰
Телефон: +389 23251251 📞
Е-пошта: dkzjn@gs.gov.mk 📧
Факс: +389 23251250 📠
Интернет-адреса: http://dkzjn.mk 🌏
Орган од каде што може да се добијат информации за постапката за ревизија
Исто како: Тело за преглед
Извор: OJS 2023/S 071-216255 (2023-04-06)

Дополнителни информации (2023-05-03)
Предмет
Метаподатоци на огласот
Вид на документ: Дополнителни информации
Заеднички речник на набавки (CPV)
Шифра: Микробиолошки култури 📦

Референца
Датуми
Датум на испраќање: 2023-05-03 📅
Датум на објавување: 2023-05-08 📅
Идентификатори
Број на огласот: 2023/S 089-272420
Се однесува на оглас: 2023/S 071-216255
OJ-S издание: 89
Дополнителни информации
Changes have been made to the technical specification
Извор: OJS 2023/S 089-272420 (2023-05-03)

Нови набавки во поврзани категории 🆕

Медицинска опрема, фармацевтски производи и производи за лична нега (19 нови набавки)

Медицинска опрема (9)